Skip to content

Bonded and insured, $2 million coverage. Free quote: (562) 647-1415

Norwalk · Downey · Whittier · Buena Park

(562) 647-1415
Installer seen from behind pressing black flashing tape around a new white vinyl window set in a house wall covered in house wrap, under overcast sky

ServicesWindow Installation

Window Installation in Norwalk

We install windows where none existed before, or where an opening is changing size. Room additions, ADUs, garage conversions and remodels all need an opening that is framed, flashed and finished so it keeps water out and looks like it was always part of your home.

New openings, not just new glass

Window installation is different from swapping an old window for a new one. We cut or frame the opening, set a header where the wall needs one, wrap the rough opening with flashing tape in the right order, and set a nail-fin window into a weather-resistant barrier. That sequence is what decides whether the window stays dry for decades or starts staining drywall after the first winter rain.

If you already have windows and simply want better ones in the same openings, our Window Replacement or Window Retrofitting pages are the better fit. This page is for the jobs where the wall itself is changing.

These projects involve permits, ordered products and sometimes other trades, so timing matters as much as workmanship. We tell you early how long the windows take to arrive, when the permit is likely to clear, and what day our crew will show up. When something shifts, you hear it from us before the day arrives.

What the work includes

Opening layout and framing
We mark the opening to the window's rough size, cut the stucco or siding cleanly, and frame with a properly sized header and jack studs where the wall carries load.
Layered flashing
Sill pan first, then jambs, then head, lapped so water always runs outward. This is the step that gets rushed most often on new openings, and the one we take slowest.
Window selection help
We walk you through frame materials, glass packages and operating styles. Bedrooms may need an egress size, and glass near tubs or doors usually needs to be tempered, so we flag those before anything is ordered.
Exterior patch and finish
Around the new window we restore the lath and stucco or the siding so the opening sits flush and weather-tight. Fresh stucco cures lighter than old walls, and we talk through color before we start.
Permit and inspection coordination
New and enlarged openings typically need a building permit. We handle the paperwork for our part of the job and schedule around the inspection so nothing gets closed up early.
Cleanup each day
Debris is hauled off, floors near the work are protected, and the site is left tidy at the end of every working day.

When a new window is the right call

  • You are adding on

    A room addition or ADU needs windows set into new framing, ideally before stucco and drywall go up.

  • A garage is becoming living space

    Converted garages almost always need new window openings for light, ventilation and code compliance.

  • A bedroom has no egress window

    Sleeping rooms need a window large enough to climb out of. If yours is too small, enlarging the opening fixes it.

  • A room is simply too dark

    Many older single-story homes have long walls with no glass at all. A well-placed window changes how a room feels through the day.

  • You want a bigger view

    Widening an opening for a larger picture window means a new header and new framing, which is installation work rather than replacement.

What moves the price

Every new opening is priced on its own conditions, so we quote after seeing the wall. The window itself is only part of the cost; the framing, flashing and exterior finish around it often matter just as much. We offer free in-home estimates with no sales pressure or obligation.

New cut versus enlarging

A fresh opening in a non-bearing wall is simpler than widening one in a bearing wall, which needs a longer header and sometimes temporary support.

Size, style and glass

Larger units, sliders versus casements, and tempered or low-E glass all change the product cost.

Exterior wall finish

Stucco patching takes more steps and cure time than siding. Textured finishes take extra care to blend.

Permits and access

Permit fees vary with scope, and second-story openings or tight side yards add labor and equipment.

How the job runs

  1. 1

    In-home estimate

    We measure, look at the wall construction and talk through what you want. You get your quote by phone or in person, with the scope written out line by line.

  2. 2

    Ordering and permit

    Once you approve, we order the windows and file for the permit. We give you a realistic arrival date for the product rather than an optimistic one.

  3. 3

    Scheduled install day

    You get an arrival window the day before. We protect floors and furniture, cut and frame the opening, flash it and set the window. Most single openings are framed and closed in the same day.

  4. 4

    Exterior finish and inspection

    Stucco or siding repair follows, with cure time built in. We coordinate the inspection and let you know right away if the inspector's schedule moves anything.

  5. 5

    Walkthrough

    We check that each window opens, locks and seals properly, show you how it operates, and leave the site clean.

Estimator stretching a tape measure across an old white-framed window on a stucco house while a homeowner holding a clipboard watches from the patio

Window installation questions

How is installation different from window replacement?

Replacement puts a new window into an existing opening. Installation means creating or changing the opening itself, with framing, a header and full flashing. If your openings are staying the same size, Window Replacement is the page for you.

Do I need a permit for a new window?

In most cases, yes. Cutting a new opening or enlarging one changes the wall structure, so the city typically requires a permit and an inspection. We include that in our scope and plan the schedule around it.

How long does the whole project take?

The install itself is usually quick, often a day per opening. The longer part is waiting for ordered windows and the permit. We give you honest dates for both at the start and call you if either one changes.

Will the stucco patch match the rest of my house?

We match texture as closely as we can. New stucco often cures a shade different from older walls, so we will talk through whether a paint coat on that wall makes sense before we begin.

Can you work alongside my contractor on an addition?

Yes. We can set windows once framing and sheathing are ready and before the exterior finish goes on. We share our dates with your contractor so the trades are not waiting on each other.

Two-story stucco house with new black-framed windows still bearing stickers, a dark front door, a stepladder, trash can and toolbox on the front walkway

Planning a new opening

Tell us about the room and the wall, and we will come out to measure. You get a clear scope, honest lead times and a crew that arrives when we say it will.